Drinking Water

Stream image

Water Quality Report

Redmond's most current Water Quality Report provides detailed reporting on Redmond's water and its latest lead and copper testing.  

Where does my drinking water come from?
Drinking Water Comes From

Redmond is part of the Cascade Water Alliance (CWA) and buys more than 65% of its supply from the Seattle Tolt River supply through the CWA. The rest of our drinking water supply comes from our five wells that serve the areas of town east of the Sammamish River.

Drinking Water Quality
Drinking Water Quality

The City of Redmond believes that safe drinking water is no accident - it is our highest priority. But we need your help to continue to be successful.

Redmond's Wellhead Protection Ordinance was a major step toward protecting approximately 35% of our City’s drinking water supply which comes from shallow well aquifers. Take a few minutes to learn how the Ordinance helps to protect our drinking water supply by visiting the Groundwater/Wellhead Protection on this website.

All of Redmond's water supply meets or exceeds all Environmental Protection Agency and Washington State Department of Health drinking water regulations. Water from each well is treated before it enters the City water supply system. Currently, Redmond provides three types of treatments - fluoridation, chlorination, and pH adjustment - to comply with these regulations.

Contact:  425-556-2847 

Cascading Water & Fresh Air Improves our Water
Cascading Water Air

They look like small plastic Wiffle balls, and there are thousands of them stacked inside new water aeration towers in Redmond. The water cascades down through the plastic balls, which break up the water into small droplets, so the extra carbon dioxide (CO2) can escape the water. Air is blown up the tower to further help get rid of the extra CO2 and keep filling the tower with fresh air. All this action aerates the water and raises its pH level, which helps to protect your household plumbing and the City's water mains.

The City operates five wells, which supply about 35 percent of the water used in Redmond's service area. Redmond's well water has a moderately high alkalinity level and much of that comes from dissolved carbon dioxide (CO2), which can corrode metal pipes. Rainwater that percolates down through the ground to replenish wells absorbs CO2 from microbes in the soil.

The new aeration technology removes about 90 percent of the dissolved CO2 in the well water without the use of chemicals. The current method used to raise the pH is to inject caustic soda into well water, at a cost of about $200,000 a year. Caustic soda is used by many drinking water municipalities to effectively adjust pH, but there are drawbacks to its use. It is hazardous for operators to handle safely, can cause water system equipment to wear out faster and can cause calcium carbonate to build-up on the inside of water mains, which slowly makes the pipe diameter smaller and restricts water flow.

The new towers are part of the water treatment processes for Wells 1 and 2, Well 3, and Well 5. Wells 1 and 2 are located in Anderson Park, while Well 3 is located along Avondale Road, and Well 5 is near the Target and Home Depot stores.

Questions about the above new water aeration towers:

Contact:  Jeff Thompson - 425-556-2884